I have been sharing my CM7/CM9/CM10/CM10.1/CM10.2-based builds for some time in several thread, which culminated in the MackayROM. I continue now with KK4.4 from where I was for JB4.3. MackayROM is based on CyanogenMod sources, with several performance enhancements.
About Cyanogen: CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer: I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
If you run into errors, I may not be able to solve it!
If you know a solution to a problem, either upload it yourself to Gerrit Code Review or contact me through pm.
The ROM is based on Cyanogen sources with the following changes:
-Mackay Kernel:
-Set of cherries picked from gerrit (differing by the day)
-Some additional patches I did myself to the source code
Feature request are OK, but remember:
1. I try to stay close to stock
2. I will not include additional apps, unless they can be build from source
3. The time I spend on features depends on how much I like them myself
Changelog of 4.0.0 - 16-Nov-2013
-ALPHA BUILD
-Boots, the added features mentioned below have been tested. No further extensive testing done yet.
-CM11.0 codebase of 16-Nov
-Added QuickSettings/Ribbons options
-Added Fastcharge tile
-Added Mackay settings
-Added Mackay kernel
-A range of small patches to improve some issues throughout the ROM (see github if interested in the details)
Full changelog of 4.0.0 compared to stock CM11.0:
CM11.0 sources of 16-Nov-2013
All features compared to stock kernel:
-Mackay kernel 0.600 (same is latest JB4.3 0.517 kernel, but renamed to 0.600 to distinguish KK4.4 kernel):
-Christopher86's cortex-A8 optimized Linaro toolchain (September version)
-O3 optimization
-updated to linux kernel version 3.0.101
-SLQB memory allocator (default, should be slightly faster)
-XZ compression of kernel & initramfs
-396MB RAM
-SIOplus scheduler
-Added Lagfree governor
-ROW scheduler (tweaked, default scheduler)
-FIOPS scheduler (tweaked)
-XZ compression of kernel & initramfs
-many improvements to IO schedulers in general
-Deadline tuning (thanks to DerTeufel)
-Ondemand tuned (updated based on code of stratosk)
-SmartassV2 governor
-OndemandX governor
-Interactive governor (updated to android 3.4 code + fixes)
-Wheatley & Lulzactive governors
-Conservative tuned
-Call volume hack (use Settings>Mackay Settings* to set volumes)
-Reduced battery polling interval
-Fast charge (activate through Settings>Advanced Settings* or the QuickCharge toggle in MackayROM)
-WiFi PM_FAST mode selection (activate using Settings>Mackay Settings*)
-Battery life extender (set through Settings>Mackay Settings*)
-CustomVoltage (set using NSTools)
-USB OTG support (needs external power supply)
-1100-1400MHz OC steps
-Custom kernel splash (Thanks to Malcho)
-Updated charging logo to match open charger
-Disabled swap & zram
-Improve memcopy/memmove
-Improve the performance of memcpy and memmove
-Kill task closest in size to memory needed to free
-LOAD_FREQ (4*HZ+61) avoids loadavg Moire
-Entropy tweaks:
http://lwn.net/Articles/489734/
-backport CPUIDLE from 3.5
-arm/crypto: Add optimized AES and SHA1 routines
-Unaligned CPU access
-Improvements to RWSEM code
-Improvements to binder code
-Improvements to tmpfs
-Added frandom (much faster random number generator)
-Updated to lowmemorykiller with PID whitelist (thanks to stratosk)
-Many parts of the code build as module to reduce effective kernel size
-Updated wifi driver to 5.90.195.114
-Updated GPU driver to DDK 1.8@2198402
-Proportional Rate Reduction for TCP
-Introduce timer slack controller
-Zram/zcache patched
ROM comes with stock colour. Version with voodoo colour can be downloaded from:
http://rootaxbox.no-ip.org/kasper_h/kernels/JB43/
Kernel for switching internal & external SD
Because vold.fstab is no longer used and has been integrated in fstab.aries (which can only be changed before compiling the kernel, as it ends up in the ramdisk), I made a special kernel version with switched SD cards:
http://rootaxbox.no-ip.org/kasper_h/...JB43/switchSD/
*Available through Settings>Mackay Settings
TWRP:
-Themed orange
-Run recovery-apps (zip files should be present in /system/mackay, launch them through advanced->run app)
Added apps:
-AngryGPS
Removed apps:
-VideoEditor & demo VideoFiles
vendor/cm:
-Adapt for custom MackayROM building (bootanimation, ROM&file name)
-Custom bootanimation (Thanks to Malcho)
vendor/samsung:
-Added scripts for Mackay Settings
hardware/samsung:
-F4k 720p patch for bigmem kernels
AriesParts (Mackay Settings in Settings menu):
Add mackay kernel settings options:
>WiFi PM mode selection
>BLX settings
>BLN activation
>Navbar selection
>Processor settings (governor/frequencies)
>IO scheduler
frameworks/base:
Changed USB page icon from Android to Cid
QuickSettings/Ribbons can be set
FastCharge toggle for QuickSettings
Settings:
Disable on/off toggle button for profiles on Settings main page
FastCharge Tile & Ribbon button
Coming from stock Samsung ROM/CM7:
-The safest way is to flash CM9 first and then flash Mackay ROM. Going directly from Samsung ROM/CM7 to Mackay ROM may lead to loosing IMEI.
Fresh install:
Can be flashed on top of any CyanogenMod build:
-Do a factory reset
-Flash ROM
-Flash gapps
-Reboot your phone
If you get an error (like metadata or anything), do the following:
-Download omni-4.4-kernel_selinux.zip from:
http://www.xdafileserver.nl/index.php?dir=Samsung%2FGalaxy+S%2FMackayROM%2FKK
-Flash this kernel from you current recovery
-Choose reboot recovery (this should bring you to a blue-colored TWRP)
-Continue with the steps above
Update:
-Flash ROM
-Reboot your phone
(no wipes or other things needed, just flash & reboot)
-Custom kernels can be used only if specific for KK4.4
Credits:
-teamhacksung/pawitp for making CyanogenMod work on our ancient phone
-stratosk/DerTeufel/Mialwe for the inspiration I got from their kernels
-rootax & xdafileserver for providing a high-speed server for high quality downloads
-Malcho for his kernel splash & bootanimation
Downloads:
XDAfileserver
Rootaxbox
Google Apps
http://d-h.st/users/dhacker29?fld_id=27426
For those who want to theme it even further, Bejda made a Mackay splash screen!
http://forum.xda-developers.com/show....php?t=2214468
To download the same kernel, but then with voodoo colour:
http://rootaxbox.no-ip.org/kasper_h/kernels/KK44/ (not yet!)
XDA:DevDB Information
[KK 4.4][ROM]Mackay ROM 4.0.0, a ROM for the Samsung Galaxy S I9000
Contributors
kasper_h
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2013-11-16
Last Updated 2013-11-16